PCM-L15S200-K79(Pre-charge/discharge)15S 200A
BMS of LiFePO4 Battery Replacement for Lead-Acid Battery
| Model: | PCM-L15S200-K79 |
|---|---|
| Working Current: | 200A |
| Size: | L250*W100*T18mm |
| Battery Type: | Li-ion/LiFePO4 |
| Battery Series: | 15S |
| Model: | PCM-L15S200-K79 |
|---|---|
| Working Current: | 200A |
| Size: | L250*W100*T18mm |
| Battery Type: | Li-ion/LiFePO4 |
| Battery Series: | 15S |
| Model：PCM-L15S200-K79 | ||||
| No. |
Test item （Test at normal temperature 25±2℃ and relative humidity≤90%） |
Criterion | ||
| 1 | Communication Interface |
RS485&UART CANBus&Bluetooth |
||
| 2 | Voltage | Charging voltage | DC：51.75V~63V CC/CV（3.45V~4.2V/Cell）15s | |
| Cell-balance detection voltage（Charge balance） | can be adjusted by required | |||
| Cell-balance detection delay time | 0.5S—2S | |||
| 3 | Current | Balance current for single cell | 32-58mA | |
| Normal operating-mode current （Gas Gauge IC） | 600 uA（average） | |||
| SLEEP operating-mode current （Gas Gauge IC） | 350 uA（average） | |||
| Maximal continuous charging current | 30-200A | |||
| Maximal continuous discharging current | 30-200A | |||
| 4 | Over charge Protection （single cell） | Over charge detection voltage | 3.6-4.35V | |
| Over charge detection delay time | 0.5S—2S | |||
| Over charge release voltage | 3.4-4.15V | |||
| 5 | Over discharge protection （single cell） | Over discharge detection voltage | 2.0-3.0V | |
| Over discharge detection delay time | 150—300mS | |||
| Over discharge release voltage | 2.3-3.2V | |||
| 6 | Over current protection（Battery pack） | Over current detection current | 90-600A | |
| Detection delay time | 50ms—300ms | |||
| Release condition | Cut load,Auto Recovery | |||
| 7 | Short protection | Detection condition | Exterior short circuit | |
| Detection delay time | 200-800us | |||
| Release condition | Cut load,Auto Recovery | |||
| 8 | Resistance | Protection circuitry （MOSFET） | ≤50mΩ | |
| 9 | Temperature | Operating Temperature Range | -40～+85℃ | |
| Storage Temperature Range | -40～+125℃ | |||
| Pre-charge/discharge ,Optional Heating Module | ||||
| SIZE: L250 *W100 *T18 mm | ||||
| NTC: 10K NTC Temperature switch：/ Weak current switch：YES Activation Method:/ | ||||
6M Unit, Maple Leaf Building, Nanshan Avenue, Nanshan District, Shenzhen City, Guangdong Province, China.
www.ayaatech.com www.ayaapower.com www.ayaatech.en.alibaba.comCopyright © 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.
