ホーム 製品

5S-9S用

  • 研究
    PCM-LX5S7A-AY041 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery PCM for 5S-9S

    www.ayaatech.com

    PCM-LX5S7A-AY041 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery PCM for 5S-9S

    PCM for 5S-9S  PCM-LX5S7A-AY041(LI-5S7A) No Test item Criterion Lifepo4 Li-ion/Li-polymer 1 Voltage Charging voltage DC 18V CC/CV(3.6V/cell) DC:21V CC/CV(4.2V/cell) Balance voltage for single cell  ……  …… 2 Current Balance current for single cell ……  …… Current consumption for single cell ≤50μA ≤50μA Max. continuous charging current 7A 7A Max. cont. discharging current 7A 7A 3 Over charge protection(single cell) Over charge detection voltage 3.90V±0.025V(optional) 4.25±0.025V(optional) Over charge detection delay time 0.5-2.0S 0.5S—2.0S Over charge release voltage 3.805±0.1V 4.05 ±0.1V 4 Over discharge protection(single cell) Over discharge detection voltage 2.00±0.8V(optional) 2.5±0.08V(optional) Over discharge detection delay time 10-200mS 10-200mS Over discharge release voltage 2.3±0.1V 3.0±0.1V 5 Over current protection Over current detection voltage depend on the above points depend on the above points Over current detection current final data fixed from actual test final data fixed from actual test Detection delay time 5-50ms 5-50ms Release condition Cut load,Auto release Cut load,Auto release 6 Short protection Detection condition Exterior short circuit Detection delay time 200~600us Release condition charge up 7 Resistance Protection circuitry ≤50mΩ 8 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ 9 Dimension L82*W16*T3mm Optional Parameters: Over charge detection voltage (V) 4.28±0.025V 4.25±0.025V 3.65±0.025V Over charge release voltage(V) 4.10±0.05V 4.05±0.05V 3.65±0.05V …

  • 研究
    PCM-L07S15-K39 7S 15A BMS/PCM with Communications

    www.ayaatech.com

    PCM-L07S15-K39 7S 15A BMS/PCM with Communications

    BMS/PCM with Communications   Model:PCM-L07S15-K39 No. Test item (Test at normal temperature 25±2℃ and relative humidity≤90%) Criterion 1 Communication Interface SMBUS 2 Voltage Charging voltage DC:20.7V~25.2V CC/CV(3.45V~4.2V/Cell)6s Cell-balance detection voltage(Charge balance) can be adjusted by required Cell-balance detection delay time 0.5S—2S 3 Current Normal operating-mode current (Gas Gauge IC) 600 uA(average) SLEEP operating-mode current (Gas Gauge IC) 350 uA(average) Maximal continuous charging current 5-15A Maximal continuous discharging current 5-15A 4 Over charge Protection (single cell) Over charge detection voltage 3.6-4.35V Over charge detection delay time 0.5S—2S Over charge release voltage 3.4-4.15V 5 Over discharge protection (single cell) Over discharge detection voltage 2.0-3.0V Over discharge detection delay time 150—300mS Over discharge release voltage 2.3-3.2V 6 Over current protection(Battery pack) Over current detection current 15-45A Detection delay time 50ms—300ms Release condition Cut load,Auto Recovery 7 Short protection Detection condition Exterior short circuit Detection delay time 200-800us Release condition Cut load,Auto Recovery 8 Resistance Protection circuitry (MOSFET) ≤50mΩ 9 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ SIZE: L120 *W63 *T8 mm NTC: 10K NTC*2pcs Temperature switch:/ Weak current switch:/ Activation Method:/

  • 研究
    PCM-L06S10-554 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance NTC PCM for 5S-9S

    www.ayaatech.com

    PCM-L06S10-554 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance NTC PCM for 5S-9S

    PCM for 5S-9S PCM-L06S10-554(6S) No Test item Criterion Lifepo4 Li-ion/Li-polymer 1 Voltage Charging voltage DC 21.6V CC/CV(3.6V/cell) DC:25.2V CC/CV(4.2V/cell) Balance voltage for single cell 3.60±0.025V 4.20±0.025V 2 Current Balance current for single cell 36±5mA 42±5mA Current consumption for single cell ≤20μA ≤20μA Max. continuous charging current 8A 8A Max. cont. discharging current 8A 8A 3 Over charge protection(single cell) Over charge detection voltage 3.90V±0.025V(optional) 4.25±0.025V(optional) Over charge detection delay time 0.5-2.0S 0.5S—2.0S Over charge release voltage 3.80±0.05V 4.15 ±0.05V 4 Over discharge protection(single cell) Over discharge detection voltage 2.00±0.8V(optional) 2.5±0.08V(optional) Over discharge detection delay time 10-300mS 10-300mS Over discharge release voltage 2.3±0.1V 3.0±0.1V 5 Over current protection Over current detection voltage depend on the above points depend on the above points Over current detection current final data fixed from actual test final data fixed from actual test Detection delay time 5-20ms 5-20ms Release condition Cut load,Auto release Cut load,Auto release 6 Short protection Detection condition Exterior short circuit Detection delay time 100~500us Release condition charge up 7 Resistance Protection circuitry ≤50mΩ 8 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ 9 Dimension L65*W36*T5.0mm Optional Parameters: Over charge detection voltage (V) 4.28±0.025V 4.25±0.025V 3.65±0.025V Over charge release voltage(V) 4.08±0.05V 4.05±0.05V …

  • 研究
    PCM-L06S10-J15 6S 10A BMS/PCM with Communications

    www.ayaatech.com

    PCM-L06S10-J15 6S 10A BMS/PCM with Communications

    BMS/PCM with Communications Model:PCM-L06S10-J15 No. Test item (Test at normal temperature 25±2℃ and relative humidity≤90%) Criterion 1 Communication Interface SMBUS 2 Voltage Charging voltage DC:20.7V~25.2V CC/CV(3.45V~4.2V/Cell)6s Cell-balance detection voltage(Charge balance) / Cell-balance detection delay time / 3 Current Normal operating-mode current (Gas Gauge IC) 600 uA(average) SLEEP operating-mode current (Gas Gauge IC) 350 uA(average) Maximal continuous charging current 3-10A Maximal continuous discharging current 3-10A 4 Over charge Protection (single cell) Over charge detection voltage 3.6-4.35V Over charge detection delay time 0.5S—2S Over charge release voltage 3.4-4.15V 5 Over discharge protection (single cell) Over discharge detection voltage 2.0-3.0V Over discharge detection delay time 150—300mS Over discharge release voltage 2.3-3.2V 6 Over current protection(Battery pack) Over current detection current 9-30A Detection delay time 50ms—300ms Release condition Cut load,Auto Recovery 7 Short protection Detection condition Exterior short circuit Detection delay time 200-800us Release condition Cut load,Auto Recovery 8 Resistance Protection circuitry (MOSFET) ≤50mΩ 9 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ SIZE: L109 *W17 *T5 mm NTC: 10K NTC Temperature switch:/ Weak current switch:/ Activation Method:/

  • 研究
    PCM-L06S12-520 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    www.ayaatech.com

    PCM-L06S12-520 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    PCM for 5S-9S PCM-L06S12-520(6S) No Test item Criterion Lifepo4 Li-ion/Li-polymer 1 Voltage Charging voltage DC 21.6VCC/CV(3.6V/cell) DC 25.2V CC/CV(4.2V/cell) Balance voltage for single cell 3.60±0.025V 4.20±0.025V 2 Current Balance current for single cell 36±5mA 42±5mA Current consumption for single cell ≤20μA ≤20μA Max. continuous charging current 12A 12A Max. cont. discharging current 12A 12A 3 Over charge protection(single cell) Over charge detection voltage 3.90V±0.025V(optional) 4.25±0.025V(optional) Over charge detection delay time 0.5-2.0S 0.5S—2.0S Over charge release voltage 3.80±0.05V 4.15 ±0.05V 4 Over discharge protection(single cell) Over discharge detection voltage 2.00±0.8V(optional) 2.5±0.08V(optional) Over discharge detection delay time 10-300mS 10-300mS Over discharge release voltage 2.3±0.1V 3.0±0.1V 5 Over current protection Over current detection voltage depend on the above points depend on the above points Over current detection current final data fixed from actual test final data fixed from actual test Detection delay time 5-20ms 5-20ms Release condition Cut load,Auto release Cut load,Auto release 6 Short protection Detection condition Exterior short circuit Detection delay time 100~500us Release condition charge up 7 Resistance Protection circuitry ≤50mΩ 8 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ 9 Dimension L64*W50*T4.6mm Optional Parameters: Over charge detection voltage (V) 4.28±0.025V 4.25±0.025V 3.65±0.025V Over charge release voltage(V) 4.08±0.05V 4.05±0.05V …

  • 研究
    AY-LX6S15A-T016 BQ34Z100 BMS/PCM with Communications

    www.ayaatech.com

    AY-LX6S15A-T016 BQ34Z100 BMS/PCM with Communications

    BMS/PCM with Communications Model: AY-LX6S15A-T016 Ver: A BQ34Z100 Test item (Test at normal temperature 25±2℃) Criterion Communication Interface I2C Voltage Charging voltage DC: 25.2V CC/CV(4.2V/Cell)6s Capacity Designing battery capacity (PCM) /Ah Supply Current Normal operating mode current: Fuel gauge in NORMAL mode. ILOAD >Sleep Current ≤200uA Low-power operating mode current: Fuel gauge in SLEEP mode. ILOAD < Sleep Current ≤130 uA Low-power operating mode current: Fuel gauge in FULLSLEEP mode. ILOAD < Sleep Current ≤12uA Maximal continuous charging current 12A Maximal continuous discharging current 12A Balance current for single cell / Over-charge Protection(single cell) Balance voltage for single cell / Over charge detection voltage 4.25±0.025V Over charge detection delay time 1S Over charge release voltage 4.15±0.1V Over discharge protection(single cell) Over discharge detection voltage 2.7±0.05V Over discharge detection delay time 1S Over discharge release voltage 3.0±0.1V Current protection(Battery pack) Discharge Over current detection current1 40±10A Detection delay time 1S Discharge Over current detection current2 80±10A Detection delay time 100ms Release condition Cut load, Auto Recovery Short protection Detection condition Exterior short circuit Detection delay time 180-300us Release condition Cut load Temperature Discharge temperature protection -10~+65℃ Charge temperature protection 0~+60℃ Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ SIZE: 52*34*6mm NTC: …

  • 研究
    PCM-LB8S15A-AY026 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    www.ayaatech.com

    PCM-LB8S15A-AY026 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    PCM for 5S-9S PCM-LB8S15A-AY026(8S) No Test item Criterion Lifepo4 Li-ion/Li-polymer 1 Voltage Charging voltage DC 28.8VCC/CV(3.6V/cell) DC:33.6V CC/CV(4.2V/cell) Balance voltage for single cell 3.60±0.025V 4.20±0.025V 2 Current Balance current for single cell 36±5mA 42±5mA Current consumption for single cell ≤20μA ≤20μA Max. continuous charging current 15A 15A Max. cont. discharging current 15A 15A 3 Over charge protection(single cell) Over charge detection voltage 3.90V±0.025V(optional) 4.25±0.025V(optional) Over charge detection delay time 0.5-2.0S 0.5S—2.0S Over charge release voltage 3.80±0.05V 4.15 ±0.05V 4 Over discharge protection(single cell) Over discharge detection voltage 2.00±0.8V(optional) 2.5±0.08V(optional) Over discharge detection delay time 10-300mS 10-300mS Over discharge release voltage 2.3±0.1V 3.0±0.1V 5 Over current protection Over current detection voltage depend on the above points depend on the above points Over current detection current final data fixed from actual test final data fixed from actual test Detection delay time 5-20ms 5-20ms Release condition Cut load,Auto release Cut load,Auto release 6 Short protection Detection condition Exterior short circuit Detection delay time 100~500us Release condition charge up 7 Resistance Protection circuitry ≤50mΩ 8 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ 9 Dimension L65*W40*T8mm Optional Parameters: Over charge detection voltage (V) 4.28±0.025V 4.25±0.025V 3.65±0.025V Over charge release voltage(V) 4.08±0.05V 4.05±0.05V 3.65±0.05V …

  • 研究
    PCM-L08S08-953(LI-8S8A)For Li-ion Li-polymer Lifepo4 battery pack BMS/PCM with Communications

    www.ayaatech.com

    PCM-L08S08-953(LI-8S8A)For Li-ion Li-polymer Lifepo4 battery pack BMS/PCM with Communications

    BMS/PCM with Communications PCM-L08S08-953(LI-8S8A) No Test item Criterion Lifepo4 Li-ion/Li-polymer 1 Voltage Charging voltage DC 25.2VCC/CV(3.6V/cell) DC 29.4V CC/CV(4.2V/cell) Balance voltage for single cell 3.60±0.025V 4.20±0.025V 2 Current Balance current for single cell 36±5mA 42±5mA Current consumption for single cell ≤20μA ≤20μA Max. continuous charging current 8A 8A Max. cont. discharging current 8A 8A 3 Over charge protection(single cell) Over charge detection voltage 3.90V±0.025V(optional) 4.25±0.025V(optional) Over charge detection delay time 0.5-2.0S 0.5S—2.0S Over charge release voltage 3.80±0.05V 4.15 ±0.05V 4 Over discharge protection(single cell) Over discharge detection voltage 2.00±0.8V(optional) 2.5±0.08V(optional) Over discharge detection delay time 10-300mS 10-300mS Over discharge release voltage 2.3±0.1V 3.0±0.1V 5 Over current protection Over current detection voltage depend on the above points depend on the above points Over current detection current final data fixed from actual test final data fixed from actual test Detection delay time 5-20ms 5-20ms Release condition Cut load,Auto release Cut load,Auto release 6 Short protection Detection condition Exterior short circuit Detection delay time 100~500us Release condition charge up 7 Resistance Protection circuitry ≤50mΩ 8 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ 9 Dimension L100*W45*T6mm Optional Parameters: Over charge detection voltage (V) 4.28±0.025V 4.25±0.025V 3.65±0.025V Over charge release voltage(V) 4.08±0.05V 4.05±0.05V …

  • 研究
    PCM-L07S10-811 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    www.ayaatech.com

    PCM-L07S10-811 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    PCM for 5S-9S PCM-L07S10-811(7S) No Test item Criterion Lifepo4 Li-ion/Li-polymer 1 Voltage Charging voltage DC 25.2VCC/CV(3.6V/cell) DC 29.4V CC/CV(4.2V/cell) Balance voltage for single cell 3.60±0.025V 4.20±0.025V 2 Current Balance current for single cell 36±5mA 42±5mA Current consumption for single cell ≤20μA ≤20μA Max. continuous charging current 10A 10A Max. cont. discharging current 10A 10A 3 Over charge protection(single cell) Over charge detection voltage 3.90V±0.025V(optional) 4.25±0.025V(optional) Over charge detection delay time 0.5-2.0S 0.5S—2.0S Over charge release voltage 3.80±0.05V 4.15 ±0.05V 4 Over discharge protection(single cell) Over discharge detection voltage 2.00±0.8V(optional) 2.5±0.08V(optional) Over discharge detection delay time 10-300mS 10-300mS Over discharge release voltage 2.3±0.1V 3.0±0.1V 5 Over current protection Over current detection voltage depend on the above points depend on the above points Over current detection current final data fixed from actual test final data fixed from actual test Detection delay time 5-20ms 5-20ms Release condition Cut load,Auto release Cut load,Auto release 6 Short protection Detection condition Exterior short circuit Detection delay time 100~500us Release condition charge up 7 Resistance Protection circuitry ≤50mΩ 8 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ 9 Dimension L60*W60*T17mm Optional Parameters: Over charge detection voltage (V) 4.28±0.025V 4.25±0.025V 3.65±0.025V Over charge release voltage(V) 4.08±0.05V 4.05±0.05V …

  • 研究
    PCM-L06S07-849 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    www.ayaatech.com

    PCM-L06S07-849 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    PCM for 5S-9S Protection Circuit Module Specifications For 22.2V(6S)Li-ion Battery Pack Model: PCM-L06S07-849(6S) No. Test Item Criterion 1 Voltage Charging voltage DC:25.2V 4.2V/Cell Balance voltage for single cell 4.2±0.025V 2 Current Balance current for single cell 32±5mA Current consumption for single cell Max 20A Maximal continuous charging current 7A Maximal continuous Discharging current 7A 3 Over charge Protection Over charge detection voltage 4.25±0.025V Over charge detection delay time 0.5S—2S Over charge release voltage 4.05±0.05V 4 Over discharge protection Over discharge detection voltage 2.50±0.062V Over discharge detection delay time 10mS—200mS Over discharge release voltage 2.50±0.062V 5 Over current protection Over current detection current 20±3A Detection delay time 5ms—20ms Release condition Cut load, Auto Recovery 6 Short protection Detection condition Exterior short circuit Detection delay time 200-500us Release condition Cut load, Auto Recovery 7 Resistance Protection circuitry ≤20mΩ 8 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃

  • 研究
    PCM-L08S08-331 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    www.ayaatech.com

    PCM-L08S08-331 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    PCM for 5S-9S  PCM-L08S08-331(A1)(8S) No Test item Criterion Lifepo4 Li-ion/Li-polymer 1 Voltage Charging voltage DC 28.8V CC/CV(3.6V/cell) DC:33.6V CC/CV(4.2V/cell) Balance voltage for single cell 3.60±0.025V 4.20±0.025V 2 Current Balance current for single cell 36±5mA 42±5mA Current consumption for single cell ≤20μA ≤20μA Max. continuous charging current 8A 8A Max. cont. discharging current 8A 8A 3 Over charge protection(single cell) Over charge detection voltage 3.90V±0.025V(optional) 4.25±0.025V(optional) Over charge detection delay time 0.5-2.0S 0.5S—2.0S Over charge release voltage 3.80±0.05V 4.15 ±0.05V 4 Over discharge protection(single cell) Over discharge detection voltage 2.00±0.8V(optional) 2.5±0.08V(optional) Over discharge detection delay time 10-300mS 10-300mS Over discharge release voltage 2.3±0.1V 3.0±0.1V 5 Over current protection Over current detection voltage depend on the above points depend on the above points Over current detection current final data fixed from actual test final data fixed from actual test Detection delay time 5-20ms 5-20ms Release condition Cut load,Auto release Cut load,Auto release 6 Short protection Detection condition Exterior short circuit Detection delay time 100~500us Release condition charge up 7 Resistance Protection circuitry ≤50mΩ 8 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ 9 Dimension L72.5*W65*T3mm Optional Parameters: Over charge detection voltage (V) 4.28±0.025V 4.25±0.025V 3.65±0.025V Over charge release voltage(V) 4.08±0.05V 4.05±0.05V …

  • 研究
    PCM-L05S06-338 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    www.ayaatech.com

    PCM-L05S06-338 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    PCM for 5S-9S PCM-L05S06-338(5S) No Test item Criterion Lifepo4 Li-ion/Li-polymer 1 Voltage Charging voltage DC 18V CC/CV(3.6V/cell) DC 21V CC/CV(4.2V/cell) Balance voltage for single cell 3.60±0.025V 4.20±0.025V 2 Current Balance current for single cell 36±5mA 42±5mA Current consumption for single cell ≤20μA ≤20μA Max. continuous charging current 7A 7A Max. cont. discharging current 7A 7A 3 Over charge protection(single cell) Over charge detection voltage 3.90V±0.025V(optional) 4.25±0.025V(optional) Over charge detection delay time 0.5-2.0S 0.5S—2.0S Over charge release voltage 3.80±0.05V 4.15 ±0.05V 4 Over discharge protection(single cell) Over discharge detection voltage 2.00±0.8V(optional) 2.5±0.08V(optional) Over discharge detection delay time 10-300mS 10-300mS Over discharge release voltage 2.3±0.1V 3.0±0.1V 5 Over current protection Over current detection voltage depend on the above points depend on the above points Over current detection current final data fixed from actual test final data fixed from actual test Detection delay time 5-20ms 5-20ms Release condition Cut load,Auto release Cut load,Auto release 6 Short protection Detection condition Exterior short circuit Detection delay time 100~500us Release condition charge up 7 Resistance Protection circuitry ≤50mΩ 8 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ 9 Dimension L70*W33*T3mm Optional Parameters: Over charge detection voltage (V) 4.28±0.025V 4.25±0.025V 3.65±0.025V Over charge release voltage(V) 4.08±0.05V …

  • 研究
    PCM-LX5S20A-AY043 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    www.ayaatech.com

    PCM-LX5S20A-AY043 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    PCM for 5S-9S PCM-LX5S20A-AY043(LI-5S20A) No Test item Criterion Lifepo4 Li-ion/Li-polymer 1 Voltage Charging voltage DC 18V CC/CV(3.6V/cell) DC:21V CC/CV(4.2V/cell) Balance voltage for single cell 3.6+/-0.025V 4.2+/-0.025V 2 Current Balance current for single cell 36+/-5mA 42+/-5mA Current consumption for single cell ≤50μA ≤50μA Max. continuous charging current 20A 20A Max. cont. discharging current 20A 20A 3 Over charge protection(single cell) Over charge detection voltage 3.90V±0.025V(optional) 4.25±0.025V(optional) Over charge detection delay time 0.5-2.0S 0.5S—2.0S Over charge release voltage 3.805±0.1V 4.05 ±0.1V 4 Over discharge protection(single cell) Over discharge detection voltage 2.00±0.8V(optional) 2.5±0.08V(optional) Over discharge detection delay time 10-200mS 10-200mS Over discharge release voltage 2.3±0.1V 3.0±0.1V 5 Over current protection Over current detection voltage depend on the above points depend on the above points Over current detection current final data fixed from actual test final data fixed from actual test Detection delay time 5-50ms 5-50ms Release condition Cut load,Auto release Cut load,Auto release 6 Short protection Detection condition Exterior short circuit Detection delay time 200~600us Release condition charge up 7 Resistance Protection circuitry ≤50mΩ 8 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ 9 Dimension L90*W42*T9mm Optional Parameters: Over charge detection voltage (V) 4.28±0.025V 4.25±0.025V 3.65±0.025V Over charge release voltage(V) 4.10±0.05V 4.05±0.05V …

  • 研究
    AY-L5S20A-M057(5S 20A)BMS/PCM with Communications

    www.ayaatech.com

    AY-L5S20A-M057(5S 20A)通信機能付きBMS/PCM

    BMS/PCM with Communications Model:AY-L5S20A- M057 No. Test item (Test at normal temperature 25±2℃ and relative humidity≤90%) Criterion 1 Communication Interface RS485&CANBUS 2 Voltage Charging voltage DC:17.25V~21V CC/CV(3.45V~4.2V/Cell)5s 3 Supply Current Normal operating-mode current (Gas Gauge IC) ≤25mA(average) SLEEP operating-mode current (Gas Gauge IC) ≤150uA(average) Maximal continuous charging current 10-20A Maximal continuous discharging current 10-20A Balance current for single cell 36-42mA 4 Over charge Protection (single cell) Balance voltage for single cell 3.6-4.2V Over charge detection voltage 3.6-4.35V Over charge detection delay time 0.5S—2S Over charge release voltage 3.4-4.15V 5 Over discharge protection (single cell) Over discharge detection voltage 2.0-3.0V Over discharge detection delay time 150—300mS Over discharge release voltage 2.3-3.2V 6 Over current protection(Battery pack) Over charge current protection 15-30A Detection delay time 1S Over current detection current 1 20-40A Detection delay time 2-5S Over current detection current 2 40-60A Detection delay time 50ms—300ms Release condition Cut load,Auto Recovery 7 Short protection Detection condition Exterior short circuit Detection delay time 200-800us Release condition Cut load,Auto Recovery 8 Resistance Protection circuitry (MOSFET) ≤50mΩ 9 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ SIZE: L80 *W60*T20 mm NTC: 10K NTC*2pcs Temperature switch:/ Weak current switch:YES Activation Method: /

  • 研究
    PCM-L08S08-953(LI-7S5A)For Li-ion Li-polymer Lifepo4 battery pack PCM for 5S-9S

    www.ayaatech.com

    PCM-L08S08-953(LI-7S5A)For Li-ion Li-polymer Lifepo4 battery pack PCM for 5S-9S

    PCM for 5S-9S PCM-L08S08-953(LI-7S5A) No Test item Criterion Lifepo4 Li-ion/Li-polymer 1 Voltage Charging voltage DC 25.2VCC/CV(3.6V/cell) DC 29.4V CC/CV(4.2V/cell) Balance voltage for single cell 3.60±0.025V 4.20±0.025V 2 Current Balance current for single cell 36±5mA 42±5mA Current consumption for single cell ≤20μA ≤20μA Max. continuous charging current 5A 5A Max. cont. discharging current 5A 5A 3 Over charge protection(single cell) Over charge detection voltage 3.90V±0.025V(optional) 4.25±0.025V(optional) Over charge detection delay time 0.5-2.0S 0.5S—2.0S Over charge release voltage 3.80±0.05V 4.15 ±0.05V 4 Over discharge protection(single cell) Over discharge detection voltage 2.00±0.8V(optional) 2.5±0.08V(optional) Over discharge detection delay time 10-300mS 10-300mS Over discharge release voltage 2.3±0.1V 3.0±0.1V 5 Over current protection Over current detection voltage depend on the above points depend on the above points Over current detection current final data fixed from actual test final data fixed from actual test Detection delay time 5-20ms 5-20ms Release condition Cut load,Auto release Cut load,Auto release 6 Short protection Detection condition Exterior short circuit Detection delay time 100~500us Release condition charge up 7 Resistance Protection circuitry ≤50mΩ 8 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ 9 Dimension L100*W45*T6mm Optional Parameters: Over charge detection voltage (V) 4.28±0.025V 4.25±0.025V 3.65±0.025V Over charge release voltage(V) 4.08±0.05V 4.05±0.05V …

  • 研究
    AY-LB7S10A-T004-7S 10A PCM/BMS BMS/PCM with Fuel Gauge

    www.ayaatech.com

    AY-LB7S10A-T004-7S 10A PCM/BMS BMS/PCM with Fuel Gauge

    BMS/PCM with Fuel Gauge Model: AY-LB7S10A-T004-LB7S10A Ver: A Test Item (Test at normal temperature 25±2℃) Criterion Communication Interface I2C BQ34Z100 Voltage Charging voltage DC:29.4V CC/CV(4.2V/Cell)7s Capacity Designing battery capacity(PCM) 10Ah Supply Current Normal operating mode current:Fuel gauge in NORMAL mode. ILOAD >Sleep Current ≤160uA Low-power operating mode current:Fuel gauge in FULLSLEEP mode.ILOAD < Sleep Current ≤80uA Maximal continuous charging current 10A Maximal continuous discharging current 10A Balance current for single cell 84±10mA Over-charge Protection(single cell) Balance voltage for single cell 4.2V±0.05V Over charge detection voltage 4.28±0.05V Over charge detection delay time 0.5S—2S Over charge release voltage 4.10±0.1V Over discharge protection(single cell) Over discharge detection voltage 3.0±0.05V Over discharge detection delay time 0.5S—2S Over discharge release voltage 3.2±0.1V Current protection(Battery pack) Discharge Over current detection current 50±10A Detection delay time 0.5S—2S Release condition Cut load, Auto Recovery Short protection Detection condition Exterior short circuit Detection delay time 200-600us Release condition Cut load Resistance Main loop electrify resistance ≤ 20mΩ Temperature Temperature protection +65℃ Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ SIZE: L100*W65*T8mm LED SIZE: 30*16*3 (6) NTC: 10KNTC B=3435 Temperature switch:/℃ (the batteries temperature) Weak current switch:/ Activation Method:/

  • 研究
    AY-LB8S5A-T003 PCM/BMS BMS/PCM with Communications

    www.ayaatech.com

    AY-LB8S5A-T003 PCM/BMS BMS/PCM with Communications

    BMS/PCM with Communications Model: AY-LB8S5A-T003 Ver: A Test item(Test at normal temperature 25±2℃) Criterion Communication Interface I2C Voltage Charging voltage DC:33.6V CC/CV(4.2V/Cell)8s Capacity Designing battery capacity(PCM) 5.4Ah Supply Current Normal operating mode current:Fuel gauge in NORMAL mode. ILOAD >Sleep Current ≤160uA Low-power operating mode current:Fuel gauge in SLEEP mode.ILOAD < Sleep Current ≤120 uA Low-power operating mode current:Fuel gauge in FULLSLEEP mode.ILOAD < Sleep Current ≤80uA Maximal continuous charging current 8A Maximal continuous discharging current 8A Balance current for single cell 42±10mA Over-charge Protection(single cell) Balance voltage for single cell 4.2V±0.05V Over charge detection voltage 4.25±0.05V Over charge detection delay time 0.5S—2S Over charge release voltage 4.10±0.1V Over discharge protection(single cell) Over discharge detection voltage 2.5±0.05V Over discharge detection delay time 0.5S—2S Over discharge release voltage 3.0±0.1V Current protection(Battery pack) ChargeOver current detection current 15±3A Detection delay time 0.5S—2S Discharge Over current detection current 15±3A Detection delay time 0.5S—2S Release condition Cut load, Auto Recovery Short protection Detection condition Exterior short circuit Detection delay time 200-600us Release condition Cut load Resistance Main loop electrify resistance ≤ 60mΩ Temperature discharge temperature protection -10~+65℃ charge temperature protection 0~+60℃ Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ SIZE: L60.3*W40*T7 mm NTC: 10KNTC B=3435 …

  • 研究
    PCM-L08S60-K38 8S 60A BMS/PCM with Communications

    www.ayaatech.com

    PCM-L08S60-K38 8S 60A BMS/PCM with Communications

    BMS/PCM with Communications Model:PCM-L08S60-K38 No. Test item (Test at normal temperature 25±2℃ and relative humidity≤90%) Criterion 1 Communication Interface I2C&Bluetooth 2 Voltage Charging voltage DC:27.6V~33.6V CC/CV(3.45V~4.2V/Cell)8s Cell-balance detection voltage(Charge balance) can be adjusted by required Cell-balance detection delay time 0.5S—2S 3 Current Normal operating-mode current (Gas Gauge IC) 600 uA(average) SLEEP operating-mode current (Gas Gauge IC) 350 uA(average) Maximal continuous charging current 20-60A Maximal continuous discharging current 20-60A 4 Over charge Protection (single cell) Over charge detection voltage 3.6-4.35V Over charge detection delay time 0.5S—2S Over charge release voltage 3.4-4.15V 5 Over discharge protection (single cell) Over discharge detection voltage 2.0-3.0V Over discharge detection delay time 150—300mS Over discharge release voltage 2.3-3.2V 6 Over current protection(Battery pack) Over current detection current 60-180A Detection delay time 50ms—300ms Release condition Cut load,Auto Recovery 7 Short protection Detection condition Exterior short circuit Detection delay time 200-800us Release condition Cut load,Auto Recovery 8 Resistance Protection circuitry (MOSFET) ≤50mΩ 9 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ SIZE: L136 *W80 *T11 mm NTC: 10K NTC*2pcs Temperature switch:65℃ Weak current switch:/ Activation Method:/

  • 研究
    PCM-L07S08-747 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance NTC PCM for 5S-9S

    www.ayaatech.com

    PCM-L07S08-747 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance NTC PCM for 5S-9S

    PCM for 5S-9S PCM-L07S08-747(7S) No Test item Criterion Lifepo4 Li-ion/Li-polymer 1 Voltage Charging voltage DC 25.2VCC/CV(3.6V/cell) DC 29.4V CC/CV(4.2V/cell) Balance voltage for single cell 3.60±0.025V 4.20±0.025V 2 Current Balance current for single cell 36±5mA 42±5mA Current consumption for single cell ≤20μA ≤20μA Max. continuous charging current 8A 8A Max. cont. discharging current 8A 8A 3 Over charge protection(single cell) Over charge detection voltage 3.90V±0.025V(optional) 4.25±0.025V(optional) Over charge detection delay time 0.5-2.0S 0.5S—2.0S Over charge release voltage 3.80±0.05V 4.15 ±0.05V 4 Over discharge protection(single cell) Over discharge detection voltage 2.00±0.8V(optional) 2.5±0.08V(optional) Over discharge detection delay time 10-300mS 10-300mS Over discharge release voltage 2.3±0.1V 3.0±0.1V 5 Over current protection Over current detection voltage depend on the above points depend on the above points Over current detection current final data fixed from actual test final data fixed from actual test Detection delay time 5-20ms 5-20ms Release condition Cut load,Auto release Cut load,Auto release 6 Short protection Detection condition Exterior short circuit Detection delay time 100~500us Release condition charge up 7 Resistance Protection circuitry ≤50mΩ 8 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ 9 Dimension L64*W41*T5mm Optional Parameters: Over charge detection voltage (V) 4.28±0.025V 4.25±0.025V 3.65±0.025V Over charge release voltage(V) 4.08±0.05V 4.05±0.05V …

  • 研究
    AY-L5S100A-M069(5S 100A)BMS/PCM with Communications

    www.ayaatech.com

    AY-L5S100A-M069(5S 100A)BMS/PCM with Communications

    BMS/PCM with Communications Model:AY-L5S100A-M069 No. Test item (Testatnormal temperature 25±2℃ and relative humidity≤90%) Criterion 1 Communication Interface RS485&CANBUS&UART 2 Voltage Charging voltage DC:17.25V~21V CC/CV(3.45V~4.2V/Cell)5s 3 Supply Current Normal operating-mode current (Gas Gauge IC) ≤25mA(average) SLEEP operating-mode current (Gas Gauge IC) ≤150uA(average) Maximal continuous charging current 30-100A Maximal continuous discharging current 30-100A Balance current for single cell 36-42mA 4 Over charge Protection (single cell) Balance voltage for single cell 3.6-4.2V Over charge detection voltage 3.6-4.35V Over charge detection delay time 0.5S—2S Over charge release voltage 3.4-4.15V 5 Over discharge protection (single cell) Over discharge detection voltage 2.0-3.0V Over discharge detection delay time 150—300mS Over discharge release voltage 2.3-3.2V 6 Over current protection(Battery pack) Over charge current protection 40-120A Detection delay time 1S Over current detection current 1 80-240A Detection delay time 2-5S Over current detection current 2 90-300A Detection delay time 50ms—300ms Release condition Cut load,Auto Recovery 7 Short protection Detection condition Exterior short circuit Detection delay time 200-800us Release condition Cut load,Auto Recovery 8 Resistance Protection circuitry (MOSFET) ≤50mΩ 9 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ SIZE: L180 *W75 *T20 mm NTC: 10K NTC*2pcs Temperature switch:/ Weak current switch:YES Activation Method: /

  • 研究
    PCM-L06S20-H22 BMS/PCM with Communications

    www.ayaatech.com

    PCM-L06S20-H22 BMS/PCM with Communications

    BMS/PCM with Communications Model:PCM-L06S20-H22 No. Test item (Test at normal temperature 25±2℃ and relative humidity≤90%) Criterion 1 Communication Interface SMBUS 2 Voltage Charging voltage DC:20.7V~25.2V CC/CV(3.45V~4.2V/Cell)6s Cell-balance detection voltage(Charge balance) can be adjusted by required Cell-balance detection delay time 0.5S—2S 3 Current Normal operating-mode current (Gas Gauge IC) 600 uA(average) SLEEP operating-mode current (Gas Gauge IC) 350 uA(average) Maximal continuous charging current 5-20A Maximal continuous discharging current 5-20A 4 Over charge Protection (single cell) Over charge detection voltage 3.6-4.35V Over charge detection delay time 0.5S—2S Over charge release voltage 3.4-4.15V 5 Over discharge protection (single cell) Over discharge detection voltage 2.0-3.0V Over discharge detection delay time 150—300mS Over discharge release voltage 2.3-3.2V 6 Over current protection(Battery pack) Over current detection current 15-60A Detection delay time 50ms—300ms Release condition Cut load,Auto Recovery 7 Short protection Detection condition Exterior short circuit Detection delay time 200-800us Release condition Cut load,Auto Recovery 8 Resistance Protection circuitry (MOSFET) ≤50mΩ 9 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ SIZE: L103*W55.6*T6mm NTC: 10K NTC*2PCS Temperature switch:/ Weak current switch:/ Activation Method:/

  • 研究
    PCM-L06S20-H22 (LI-6S) BMS/PCM with Communications

    www.ayaatech.com

    PCM-L06S20-H22 (LI-6S) BMS/PCM with Communications

    BMS/PCM with Communications Model:PCM-L06S20-H22 No. Test item (Test at normal temperature 25±2℃ and relative humidity≤90%) Criterion 1 Communication Interface SMBUS 2 Voltage Charging voltage DC:20.7V~25.2V CC/CV(3.45V~4.2V/Cell)6s Cell-balance detection voltage(Charge balance) can be adjusted by required Cell-balance detection delay time 0.5S—2S 3 Current Normal operating-mode current (Gas Gauge IC) 600 uA(average) SLEEP operating-mode current (Gas Gauge IC) 350 uA(average) Maximal continuous charging current 5-20A Maximal continuous discharging current 5-20A 4 Over charge Protection (single cell) Over charge detection voltage 3.6-4.35V Over charge detection delay time 0.5S—2S Over charge release voltage 3.4-4.15V 5 Over discharge protection (single cell) Over discharge detection voltage 2.0-3.0V Over discharge detection delay time 150—300mS Over discharge release voltage 2.3-3.2V 6 Over current protection(Battery pack) Over current detection current 15-60A Detection delay time 50ms—300ms Release condition Cut load,Auto Recovery 7 Short protection Detection condition Exterior short circuit Detection delay time 200-800us Release condition Cut load,Auto Recovery 8 Resistance Protection circuitry (MOSFET) ≤50mΩ 9 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ SIZE: L103*W55.6*T6mm NTC: 10K NTC*2PCS Temperature switch:/ Weak current switch:/ Activation Method:/

  • 研究
    PCM-L06S50-L33 BMS/PCM with Communications

    www.ayaatech.com

    PCM-L06S50-L33 BMS/PCM with Communications

    BMS/PCM with Communications Model:PCM-L06S50-L33 No. Test item (Test at normal temperature 25±2℃ and relative humidity≤90%) Criterion 1 Communication Interface I2C 2 Voltage Charging voltage DC:20.7V~25.2V CC/CV(3.45V~4.2V/Cell)6s Cell-balance detection voltage(Charge balance) can be adjusted by required Cell-balance detection delay time 0.5S—2S 3 Current Normal operating-mode current (Gas Gauge IC) 600 uA(average) SLEEP operating-mode current (Gas Gauge IC) 350 uA(average) Maximal continuous charging current 10-50A Maximal continuous discharging current 10-50A 4 Over charge Protection (single cell) Over charge detection voltage 3.6-4.35V Over charge detection delay time 0.5S—2S Over charge release voltage 3.4-4.15V 5 Over discharge protection (single cell) Over discharge detection voltage 2.0-3.0V Over discharge detection delay time 150—300mS Over discharge release voltage 2.3-3.2V 6 Over current protection(Battery pack) Over current detection current 30-150A Detection delay time 50ms—300ms Release condition Cut load,Auto Recovery 7 Short protection Detection condition Exterior short circuit Detection delay time 200-800us Release condition Cut load,Auto Recovery 8 Resistance Protection circuitry (MOSFET) ≤50mΩ 9 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ SIZE: L105*W65 *T8mm NTC:10K NTC*2PCS Temperature switch: / Weak current switch:/ Activation Method: /

  • 研究
    PCM-LB07S20A-AY026V4 BMS for lithium batteries

    www.ayaatech.com

    PCM-LB07S20A-AY026V4 BMS for lithium batteries

    Model:PCM-LB07S20A-AY026V4 (LF-6S10A)  Battery Type:Li-ion,LiFePO4 Series(S):6S Rated Voltahe:21.6V Continuous Discharge Current:10A Active balance:/ Communication Protocols:/ Size:L65 * W40 * T7 mm Application Fields:LiFePO4 battery pack,lithium batteries PCM-LB07S20A-AY026V4 Model:   PCM-LB07S20A-AY026V4 (LF-6S10A)   Ver:   A Test item(Test at normal temperature 25±2℃ ) Criterion Voltage Charging voltage DC: 21.6V  CC/CV(3.6v/Cell)6S Supply Current Normal current consumption ≤30uA Maximal continuous charging current 10A Maximal continuous discharging current 10A Balance Balance current for single cell 36±10mA Balance voltage for single cell 3.50±0.05V Over-charge Protection(single cell) Over charge detection voltage 3.65±0.05V Over charge detection delay time 0.5S—2S Over charge release voltage 3.55±0.1V Over discharge protection(single cell) Over discharge detection voltage 2.3±0.05V Over discharge detection delay time 10—200mS Over discharge release voltage 2.7±0.1V Current protection(Battery pack) Discharge over current detection current 30±5A Detection delay time 5mS—20mS Release condition Cut load,AutoRecovery Short protection Detection condition Exterior short circuit Detection delay time 200-600uS Release condition Cut load Resistance Main loop electrify resistance ≤30mΩ Temperature High temperature discharge protection 75℃ Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ SIZE:  L65 * W40 * T7  mm NTC:  10K NTC cut off 75 ℃ Temperature switch:  / ℃ (the batteries temperature) Weak current switch: / Activation Method: /  

  • 研究
    PCM-LX06S07A-641 BMS for lithium batteries

    www.ayaatech.com

    PCM-LX06S07A-641 BMS for lithium batteries

    PCM-LX06S07A-641 Model: PCM-LX06S07A-641(A-1) (LF-6S7A) Ver: A Test item(Test at normal temperature 25±2℃ ) Criterion Voltage Charging voltage DC: 21.6V CC/CV(3.6v/Cell)6S Supply Current Normal current consumption ≤20uA Maximal continuous charging current 7A Maximal continuous discharging current 7A Balance Balance current for single cell / Balance voltage for single cell / Over-charge Protection(single cell) Over charge detection voltage 3.9±0.1V Over charge detection delay time 0.5S—2S Over charge release voltage 3.8±0.1V Over-discharge Protection(single cell) Over discharge detection voltage 2.0±0.1V Over discharge detection delay time 10—300mS Over discharge release voltage 2.3±0.1V Current protection(Battery pack) Discharge over current detection current 20±3A Detection delay time 50mS—500mS Release condition Cut load,AutoRecovery Short protection Detection condition Exterior short circuit Detection delay time 200-800uS Release condition Cut load Resistance Main loop electrify resistance ≤20mΩ Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ SIZE: L103 * W17 * T5 mm NTC: / Temperature switch: / ℃ (the batteries temperature) Weak current switch: / Activation Method: /

  • 研究
    PCM-L05S100A-AY073 BMS for lithium batteries

    www.ayaatech.com

    PCM-L05S100A-AY073 BMS for lithium batteries

    PCM-L05S100A-AY073 Model: PCM-L05S100A-AY073 (LI-5S80A) Ver: A Test item(Test at normal temperature 25±2℃ ) Criterion Voltage Charging voltage DC: 21V CC/CV(4.2v/Cell)5S Supply Current Normal current consumption ≤50uA Maximal continuous charging current 80A Maximal continuous discharging current 80A Balance Balance current for single cell 42±10mA Balance voltage for single cell 4.2±0.05V Over-charge Protection(single cell) Over charge detection voltage 4.25±0.05V Over charge detection delay time 0.5S—2S Over charge release voltage 4.10±0.1V Over-discharge Protection(single cell) Over discharge detection voltage 2.8±0.05V Over discharge detection delay time 10—200mS Over discharge release voltage 3.0±0.1V Current protection(Battery pack) Discharge over current detection current 300±50A Detection delay time 5mS—50mS Release condition Cut load,AutoRecovery Short protection Detection condition Exterior short circuit Detection delay time 200-600uS Release condition Cut load Resistance Main loop electrify resistance ≤30mΩ Temperature High temperature discharge protection 65±3℃ Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ SIZE: L120 * W60 * T18 mm NTC: / Temperature switch: 65 ℃ (the batteries temperature) Weak current switch: / Activation Method: /

  • 研究
    PCM-Li05S8-002(B) Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery PCM for 5S-9S

    www.ayaatech.com

    PCM-Li05S8-002(B) Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery PCM for 5S-9S

    PCM for 5S-9S PCM-Li05S8-002(B)(5S) No Test item Criterion       Lifepo4 Li-ion/Li-polymer 1 Voltage Charging voltage DC 18VCC/CV(3.6V/cell) DC 21V CC/CV(4.2V/cell) Balance voltage for single cell 3.60±0.025V 4.20±0.025V 2 Current Balance current for single cell 36±5mA 42±5mA Current consumption for single cell ≤20μA ≤20μA Max. continuous charging current 7A 7A Max. cont. discharging current 7A 7A 3 Over charge protection(single cell) Over charge detection voltage 3.90V±0.025V(optional) 4.25±0.025V(optional) Over charge detection delay time 0.5-2.0S 0.5S—2.0S Over charge release voltage 3.80±0.05V 4.15 ±0.05V 4 Over discharge protection(single cell) Over discharge detection voltage 2.00±0.8V(optional) 2.5±0.08V(optional) Over discharge detection delay time 10-300mS 10-300mS Over discharge release voltage 2.3±0.1V 3.0±0.1V 5 Over current protection Over current detection voltage depend on the above points depend on the above points Over current detection current final data fixed from actual test final data fixed from actual test Detection delay time 5-20ms 5-20ms Release condition Cut load,Auto release Cut load,Auto release 6 Short protection Detection condition Exterior short circuit Detection delay time 100~500us Release condition charge up 7 Resistance Protection circuitry ≤50mΩ 8 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ 9 Dimension L80*W16*T3mm Optional Parameters: Over charge detection voltage (V) 4.28±0.025V 4.25±0.025V 3.65±0.025V Over charge release …

  • 研究
    PCM-LB24S100A-AY233 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Temperature Switch PCM for 5S-9S

    www.ayaatech.com

    PCM-LB24S100A-AY233 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Temperature Switch PCM for 5S-9S

    PCM for 5S-9S  PCM-LB24S100A-AY233(LI-8S80A) No Test item Criterion Lifepo4 Li-ion/Li-polymer 1 Voltage Charging voltage DC 28.8V CC/CV(3.6V/cell) DC:33.6V CC/CV(4.2V/cell) Balance voltage for single cell  ……  …… 2 Current Balance current for single cell ……  …… Current consumption for single cell ≤50μA ≤50μA Max. continuous charging current 20A 80A Max. cont. discharging current 20A 80A 3 Over charge protection(single cell) Over charge detection voltage 3.90V±0.025V(optional) 4.25±0.025V(optional) Over charge detection delay time 0.5-2.0S 0.5S—2.0S Over charge release voltage 3.805±0.1V 4.05 ±0.1V 4 Over discharge protection(single cell) Over discharge detection voltage 2.00±0.8V(optional) 2.5±0.08V(optional) Over discharge detection delay time 10-200mS 10-200mS Over discharge release voltage 2.3±0.1V 3.0±0.1V 5 Over current protection Over current detection voltage depend on the above points depend on the above points Over current detection current final data fixed from actual test final data fixed from actual test Detection delay time 5-50ms 5-50ms Release condition Cut load,Auto release Cut load,Auto release 6 Short protection Detection condition Exterior short circuit Detection delay time 200~600us Release condition charge up 7 Resistance Protection circuitry ≤50mΩ 8 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ 9 Dimension L90*W65*T10mm Optional Parameters: Over charge detection voltage (V) 4.28±0.025V 4.25±0.025V 3.65±0.025V Over charge release voltage(V) 4.10±0.05V 4.05±0.05V …

  • 研究
    PCM-L05S75-J49 5S 75A BMS/PCM with Communications

    www.ayaatech.com

    PCM-L05S75-J49 5S 75A BMS/PCM with Communications

    BMS/PCM with Communications Model:PCM-L05S75-J49 No. Test item(Test at normal temperature 25±2℃ and relative humidity≤90%) Criterion 1 Communication Interface SMBUS 2 Voltage Charging voltage DC:17.25V~21V CC/CV(3.45V~4.2V/Cell)5s Cell-balance detection voltage(Charge balance) can be adjusted by required Cell-balance detection delay time 0.5S—2S 3 Current Normal operating-mode current (Gas Gauge IC) 600 uA(average) SLEEP operating-mode current (Gas Gauge IC) 350 uA(average) Maximal continuous charging current 20-75A Maximal continuous discharging current 20-75A 4 Over charge Protection (single cell) Over charge detection voltage 3.6-4.35V Over charge detection delay time 0.5S—2S Over charge release voltage 3.4-4.15V 5 Over discharge protection (single cell) Over discharge detection voltage 2.0-3.0V Over discharge detection delay time 150—300mS Over discharge release voltage 2.3-3.2V 6 Over current protection(Battery pack) Over current detection current 60-220A Detection delay time 50ms—300ms Release condition Cut load,Auto Recovery 7 Short protection Detection condition Exterior short circuit Detection delay time 200-800us Release condition Cut load,Auto Recovery 8 Resistance Protection circuitry (MOSFET) ≤50mΩ 9 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ SIZE: L130 *W116 *T8 mm NTC: 10K NTC Temperature switch:/ Weak current switch:/ Activation Method:/

  • 研究
    PCM-L06S12-520 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    www.ayaatech.com

    PCM-L06S12-520 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    PCM for 5S-9S PCM-L06S12-520(6S) No Test item Criterion       Lifepo4 Li-ion/Li-polymer 1 Voltage Charging voltage DC 21.6VCC/CV(3.6V/cell) DC 25.2V CC/CV(4.2V/cell) Balance voltage for single cell 3.60±0.025V 4.20±0.025V 2 Current Balance current for single cell 36±5mA 42±5mA Current consumption for single cell ≤20μA ≤20μA Max. continuous charging current 12A 12A Max. cont. discharging current 12A 12A 3 Over charge protection(single cell) Over charge detection voltage 3.90V±0.025V(optional) 4.25±0.025V(optional) Over charge detection delay time 0.5-2.0S 0.5S—2.0S Over charge release voltage 3.80±0.05V 4.15 ±0.05V 4 Over discharge protection(single cell) Over discharge detection voltage 2.00±0.8V(optional) 2.5±0.08V(optional) Over discharge detection delay time 10-300mS 10-300mS Over discharge release voltage 2.3±0.1V 3.0±0.1V 5 Over current protection Over current detection voltage depend on the above points depend on the above points Over current detection current final data fixed from actual test final data fixed from actual test Detection delay time 5-20ms 5-20ms Release condition Cut load,Auto release Cut load,Auto release 6 Short protection Detection condition Exterior short circuit Detection delay time 100~500us Release condition charge up 7 Resistance Protection circuitry ≤50mΩ 8 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ 9 Dimension L64*W50*T4.6mm Optional Parameters: Over charge detection voltage (V) 4.28±0.025V 4.25±0.025V 3.65±0.025V Over charge release …

  • 研究
    PCM-L06S10-554 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance NTC PCM for 5S-9S

    www.ayaatech.com

    PCM-L06S10-554 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance NTC PCM for 5S-9S

    PCM for 5S-9S PCM-L06S10-554(6S) No Test item Criterion       Lifepo4 Li-ion/Li-polymer 1 Voltage Charging voltage DC 21.6V CC/CV(3.6V/cell) DC:25.2V CC/CV(4.2V/cell) Balance voltage for single cell 3.60±0.025V 4.20±0.025V 2 Current Balance current for single cell 36±5mA 42±5mA Current consumption for single cell ≤20μA ≤20μA Max. continuous charging current 8A 8A Max. cont. discharging current 8A 8A 3 Over charge protection(single cell) Over charge detection voltage 3.90V±0.025V(optional) 4.25±0.025V(optional) Over charge detection delay time 0.5-2.0S 0.5S—2.0S Over charge release voltage 3.80±0.05V 4.15 ±0.05V 4 Over discharge protection(single cell) Over discharge detection voltage 2.00±0.8V(optional) 2.5±0.08V(optional) Over discharge detection delay time 10-300mS 10-300mS Over discharge release voltage 2.3±0.1V 3.0±0.1V 5 Over current protection Over current detection voltage depend on the above points depend on the above points Over current detection current final data fixed from actual test final data fixed from actual test Detection delay time 5-20ms 5-20ms Release condition Cut load,Auto release Cut load,Auto release 6 Short protection Detection condition Exterior short circuit Detection delay time 100~500us Release condition charge up 7 Resistance Protection circuitry ≤50mΩ 8 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ 9 Dimension L65*W36*T5.0mm Optional Parameters: Over charge detection voltage (V) 4.28±0.025V 4.25±0.025V 3.65±0.025V Over charge release …

  • 研究
    PCM-Li05S8-002(B) Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery PCM for 5S-9S

    www.ayaatech.com

    PCM-Li05S8-002(B) Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery PCM for 5S-9S

    PCM for 5S-9S PCM-Li05S8-002(B)(5S) No Test item Criterion Lifepo4 Li-ion/Li-polymer 1 Voltage Charging voltage DC 18VCC/CV(3.6V/cell) DC 21V CC/CV(4.2V/cell) Balance voltage for single cell 3.60±0.025V 4.20±0.025V 2 Current Balance current for single cell 36±5mA 42±5mA Current consumption for single cell ≤20μA ≤20μA Max. continuous charging current 7A 7A Max. cont. discharging current 7A 7A 3 Over charge protection(single cell) Over charge detection voltage 3.90V±0.025V(optional) 4.25±0.025V(optional) Over charge detection delay time 0.5-2.0S 0.5S—2.0S Over charge release voltage 3.80±0.05V 4.15 ±0.05V 4 Over discharge protection(single cell) Over discharge detection voltage 2.00±0.8V(optional) 2.5±0.08V(optional) Over discharge detection delay time 10-300mS 10-300mS Over discharge release voltage 2.3±0.1V 3.0±0.1V 5 Over current protection Over current detection voltage depend on the above points depend on the above points Over current detection current final data fixed from actual test final data fixed from actual test Detection delay time 5-20ms 5-20ms Release condition Cut load,Auto release Cut load,Auto release 6 Short protection Detection condition Exterior short circuit Detection delay time 100~500us Release condition charge up 7 Resistance Protection circuitry ≤50mΩ 8 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ 9 Dimension L80*W16*T3mm Optional Parameters: Over charge detection voltage (V) 4.28±0.025V 4.25±0.025V 3.65±0.025V Over charge release voltage(V) 4.08±0.05V 4.05±0.05V …

  • 研究
    PCM-LB8S15A-AY026 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    www.ayaatech.com

    PCM-LB8S15A-AY026 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    PCM for 5S-9S PCM-LB8S15A-AY026(8S) No Test item Criterion       Lifepo4 Li-ion/Li-polymer 1 Voltage Charging voltage DC 28.8VCC/CV(3.6V/cell) DC:33.6V CC/CV(4.2V/cell) Balance voltage for single cell 3.60±0.025V 4.20±0.025V 2 Current Balance current for single cell 36±5mA 42±5mA Current consumption for single cell ≤20μA ≤20μA Max. continuous charging current 15A 15A Max. cont. discharging current 15A 15A 3 Over charge protection(single cell) Over charge detection voltage 3.90V±0.025V(optional) 4.25±0.025V(optional) Over charge detection delay time 0.5-2.0S 0.5S—2.0S Over charge release voltage 3.80±0.05V 4.15 ±0.05V 4 Over discharge protection(single cell) Over discharge detection voltage 2.00±0.8V(optional) 2.5±0.08V(optional) Over discharge detection delay time 10-300mS 10-300mS Over discharge release voltage 2.3±0.1V 3.0±0.1V 5 Over current protection Over current detection voltage depend on the above points depend on the above points Over current detection current final data fixed from actual test final data fixed from actual test Detection delay time 5-20ms 5-20ms Release condition Cut load,Auto release Cut load,Auto release 6 Short protection Detection condition Exterior short circuit Detection delay time 100~500us Release condition charge up 7 Resistance Protection circuitry ≤50mΩ 8 Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ 9 Dimension L65*W40*T8mm Optional Parameters: Over charge detection voltage (V) 4.28±0.025V 4.25±0.025V 3.65±0.025V Over charge release voltage(V) …

  • 研究
    PCM-L05S60-F91 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    www.ayaatech.com

    PCM-L05S60-F91 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    PCM for 5S-9S PCM-L05S60-F91  LI-5S50A Model: PCM-L05S60-F91(5S) ver: A Test item(Test at normal temperature 25±2℃) Criterion Voltage Charging voltage DC:21V CC/CV(4.2v/Cell)5s Capacity Designing battery capacity(PCM) 5200mAh Supply Current Normal operating mode current: Fuel gauge in NORMAL mode. ILOAD >Sleep Current ≤50uA Maximal continuous charging current 60A Maximal continuous discharging current 60A Balance current for single cell 68±10mA Over-charge Protection(single cell) Balance voltage for single cell 4.2V±0.05V Over charge detection voltage 4.25±0.05V Over charge detection delay time 0.5S—2S Over charge release voltage 4.15±0.1V Over discharge protection(single cell) Over discharge detection voltage 2.75±0.1V Over discharge detection delay time 150—300mS Over discharge release voltage 3.0±0.1V Current protection(Battery pack) ChargeOver current detection current / Detection delay time / Discharge Over current detection current 150±20A Detection delay time 50ms—200ms Release condition Cut load, Auto Recovery Short protection Detection condition Exterior short circuit Detection delay time 200-800us Release condition Cut load Resistance Main loop electrify resistance ≤30mΩ Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ SIZE: L120*W65*T11 mm NTC: / Temperature switch:90℃/65℃ Weak current switch:/ Activation Method:/

  • 研究
    PCM-L08S25-A72 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    www.ayaatech.com

    PCM-L08S25-A72 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 5S-9S

    PCM for 5S-9S   Model: PCM-L08S25-A72(LF-8S10A)          ver:  A Test  item(Test at normal temperature 25±2℃) Criterion Voltage Charging voltage DC: 28.8V  CC/CV(3.6V/Cell)8S Capacity Designing battery capacity(PCM) /mAh Supply Current Normal operating mode current: Fuel gauge in   NORMAL mode. ILOAD >Sleep Current ≤30uA Maximal continuous charging current 25A Maximal continuous discharging current 25A Balance current for single cell 36mA±5mA Over-charge Protection(single cell) Balance voltage for single cell 3.6V±0.05V Over charge detection voltage 3.90±0.05V Over charge detection delay time 0.5S—2S Over charge release voltage 3.80±0.10V Over discharge protection(single cell) Over discharge detection voltage 2.00±0.10V Over discharge detection delay time 0.5S—2S Over discharge release voltage 2.30±0.10V Current protection(Battery pack) ChargeOver current detection current / Detection delay time / Discharge Over current detection current 60±10A Detection delay time 200-600us Release condition Cut load, Auto Recovery Short protection Detection condition Exterior short circuit Detection delay time 200-600us Release condition Cut load Resistance Main loop electrify resistance ≤20mΩ Temperature high temperature discharge protection 65℃ Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ SIZE: L119*W51*T6.5mm NTC: /         Temperature switch: 65 ℃ (the batteries temperature)          Weak current switch:/          Activation Method:/

  • 研究
    PCM-L07S12-476V3 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance NTC PCM for 5S-9S

    www.ayaatech.com

    PCM-L07S12-476V3 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance NTC PCM for 5S-9S

    PCM for 5S-9S Model:  PCM-L07S12-476V3(LI-7S12A)        ver:  A Test  item(Test at normal temperature 25±2℃) Criterion Voltage Charging voltage DC:29.4V  CC/CV(4.2v/Cell)7s Supply Current Normal operating mode current: Fuel gauge in    NORMAL mode. ILOAD >Sleep Current ≤50uA Maximal continuous charging current 12A Maximal continuous discharging current 12A Balance current for single cell 42±10mA Over-charge Protection(single cell) Balance voltage for single cell 4.18±0.05V Over charge detection voltage 4.25±0.05V Over charge detection delay time 0.5S—2S Over charge release voltage 4.15±0.1V Over discharge protection(single cell) Over discharge detection voltage 2.8±0.05V Over discharge detection delay time 0.5S—2S Over discharge release voltage 3.0±0.1V Current protection(Battery pack) ChargeOver current detection current / Detection delay time / Discharge Over current detection current 35±5A Detection delay time 0.5S—2S Release condition Cut load, Auto Recovery Short protection Detection condition Exterior short circuit Detection delay time 200-600us Release condition Cut load Resistance Main loop electrify resistance ≤30mΩ Temperature Operating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ SIZE: L123*W34*T5 mm NTC: 10K NTC         Temperature switch:/         Weak current switch:/          Activation Method:/            

  • 研究
    Custom Wholesale Intelligent UAV Lithium Battery 8S 60A BMS OEM UAV Battery Management System Battery Protection PCB RHOS Certification

    www.ayaatech.com

    Custom Wholesale Intelligent UAV Lithium Battery 8S 60A BMS OEM UAV Battery Management System Battery Protection PCB RHOS Certification

    Model Number PCM-L08S60-K38 Communication Interface I2C&Bluetooth Charging voltage DC:27.6V~33.6V CC/CV(3.45V~4.2V/Cell)8s Maximal continuous charging current 20-60A Maximal continuous discharging current 20-60A Normal operating-mode current 600 uA SLEEP operating-mode current 350 uA Balance current for single cell / Balance voltage for single cell / Over charge detection voltage 3.6-4.35V Over discharge detection voltage 2.0-3.0V Over charge current protection / Over current detection current 80-180A Short Protection YES Technical Specification size L136 *W80 *T11 mm NTC   10K Temperature switch 65 ℃(the batteries temperature) Weak currentswitch / Active balance / Heater / Braking Resistors / Other Parameter Low temperature protOperating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ Temperature Parameter LCD display screen / LED light board  / Bluetooth mode / 4G  / GPS  / Optional Configuration

  • 研究
    6S BMS 100A Protection Circuit Board With Balance and Temperature For UAV

    www.ayaatech.com

    6S BMS 100A Protection Circuit Board With Balance and Temperature For UAV

    Model Number PCM-L06S100-L34 Communication Interface I2C Charging voltage DC:20.7V~25.2V CC/CV(3.45V~4.2V/Cell)6s Maximal continuous charging current 30-100A Maximal continuous discharging current 30-100A Normal operating-mode current 600 uA SLEEP operating-mode current 350 uA Balance current for single cell / Balance voltage for single cell / Over charge detection voltage 3.6-4.35V Over discharge detection voltage 2.0-3.0V Over charge current protection / Over current detection current 90-300A Short Protection YES Technical Specification size L145*W105*T8mm NTC   10K Temperature switch / ℃(the batteries temperature) Weak currentswitch / Active balance / Heater / Braking Resistors / Other Parameter Low temperature protOperating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ Temperature Parameter LCD display screen / LED light board  / Bluetooth mode / 4G  / GPS  / Optional Configuration  

  • 研究
    5S 75A SMBUS Bluetooth PCB Product Manufactur for 18V 18.5V Lithium Ion Batteries 15V 16V Electric Scooter UAV LiFePO4 Battery Packs

    www.ayaatech.com

    5S 75A SMBUS Bluetooth PCB Product Manufactur for 18V 18.5V Lithium Ion Batteries 15V 16V Electric Scooter UAV LiFePO4 Battery Packs

    Model Number PCM-L05S75-J49 Communication Interface SMBUS Charging voltage DC:17.25V~21V CC/CV(3.45V~4.2V/Cell)5s Maximal continuous charging current 20-75A Maximal continuous discharging current 20-75A Normal operating-mode current 600 uA SLEEP operating-mode current 350 uA Balance current for single cell / Balance voltage for single cell / Over charge detection voltage 3.6-4.35V Over discharge detection voltage 2.0-3.0V Over charge current protection / Over current detection current 1 60-240A Short Protection YES Technical Specification size L130 *W116 *T8 mm NTC 10K Temperature switch / ℃(the batteries temperature) Weak currentswitch / Active balance / Heater / Braking Resistors / Other Parameter Low temperature protOperating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ Temperature Parameter LCD display screen / LED light board / Bluetooth mode / 4G / GPS / Optional Configuration 5S 75A SMBUS Bluetooth BMS for 18V 18.5V Lithium Ion & 15V 16V LiFePO4 UAV Drone Battery Packs This sophisticated 5S 75A BMS, which offers smart battery management for both 18V/18.5V Lithium-ion and 15V/16V LiFePO4 configurations, was created especially for UAV drone battery packs. For demanding aerial applications, it provides reliable performance and real-time data access with integrated SMBUS connection and Bluetooth monitoring. Compact yet strong, it guarantees long battery life, safe flying, and ideal cell balancing, …

  • 研究
    BMS for Li-ion 17.25V 21V 30A 100A Lithium Battery 5S Circuit Board for UAV

    www.ayaatech.com

    BMS for Li-ion 17.25V 21V 30A 100A Lithium Battery 5S Circuit Board for UAV

    Model Number AY-L5S100A-M069 Communication Interface RS485&CANBUS&UART Charging voltage DC:17.25V~21V CC/CV(3.45V~4.2V/Cell)5s Maximal continuous charging current 30-100A Maximal continuous discharging current 30-100A Current consume in normal operation ≤25mA SLEEP operating-mode current ≤150uA Balance current for single cell 36-42mA Balance voltage for single cell 3.6-4.2V Over charge detection voltage 3.6-4.35V Over discharge detection voltage 2.0-3.0V Over charge current protection 40-120A Over current detection current 1 80-240A Over current detection current 2 90-300A Short Protection YES Technical Specification size L180 *W75 *T20 mm NTC 10K Temperature switch / ℃(the batteries temperature) Weak currentswitch YES Active balance / Heater / Braking Resistors / Other Parameter Low temperature protOperating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ Temperature Parameter LCD display screen / LED light board / Bluetooth mode / 4G / GPS / Optional Configuration

  • 研究
    OEM/ODM Battery Management System for UAV 5S 20A 30A BMS Li-ion/LiFePO4 BMS PCBA

    www.ayaatech.com

    OEM/ODM Battery Management System for UAV 5S 20A 30A BMS Li-ion/LiFePO4 BMS PCBA

    Model Number AY-L5S20A- M057 Communication Interface RS485&CANBUS Charging voltage DC:17.25V~21V CC/CV(3.45V~4.2V/Cell)5s Maximal continuous charging current 10-20A Maximal continuous discharging current 10-20A Current consume in normal operation ≤25mA Current consume in sleep operation ≤150uA Balance voltage for single cell 3.6-4.2V Over charge detection voltage 3.6-4.35V Charge Over current detection current 15-30A Discharge Over current detection current 1 20-40A Discharge Over current detection current 2 40-60A Short Protection YES Technical Specification size L80 *W60*T20 mm NTC 10K Temperature switch / ℃(the batteries temperature) Weak currentswitch YES Active balance / Heater / Braking Resistors / Other Parameter Low temperature protOperating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ Temperature Parameter LCD display screen / LED light board / Bluetooth mode / 4G / GPS / Optional Configuration

  • 研究
    BMS Intelligent Battery Management System BMS LiFePO4 Battery Pack for Electric Bicycle Scooter Medical Equipment 6S 30A

    www.ayaatech.com

    BMS Intelligent Battery Management System BMS LiFePO4 Battery Pack for Electric Bicycle Scooter Medical Equipment 6S 30A

    Model Number PCM-L07S30-C29 Communication Interface SMBUS Charging voltage DC:20.7V~25.2V CC/CV(3.45V~4.2V/Cell)6s Maximal continuous charging current 10-30A Maximal continuous discharging current 10-30A Current consume in normal operation 600 uA Over charge detection voltage 3.6-4.35V Over discharge detection voltage 2.0-3.0V Over current detection current 30-90A Charge Over current detection current 1 / ChargeOver current detection current 2 / Discharge Over current detection current 1 / Discharge Over current detection current 2 / Short Protection YES Technical Specification size L126*W65*T6mm NTC / Temperature switch 66 ℃(the batteries temperature) Weak currentswitch / Active balance / Heater / Braking Resistors / Other Parameter Low temperature protOperating Temperature Range -40~+85℃ Storage Temperature Range -40~+125℃ Temperature Parameter LCD display screen / LED light board / Bluetooth mode / 4G / GPS / Optional Configuration

バッテリーシリーズ モデル Picture 動作電流 バランス サイズ 述べる
5S PCM-LX5S7A-AY041 7A いいえ L82*W16*T3 mm 該当なし
5S PCM-L05S06-338 7A はい L70*W33*T3 mm 該当なし
5S PCM-LX5S20A-AY043 20A はい L90*W42*T9 mm 該当なし
5S AY-L5S20A-M057 20A はい 縦80mm×横60mm×厚さ20mm with RS485,CANBUS
5S AY-L5S100A-M069 100A はい L180*W75*T20mm with RS485,CANBUS,UART
5S PCM-L05S100A-AY073 80A いいえ L120 * W60 * T18 mm 該当なし
5S PCM-Li05S8-002(B)(5S) 7A いいえ L80*W16*T3 mm 該当なし
5S PCM-L05S75-J49 75A いいえ L130*W116*T8mm NTC付き
5S PCM-Li05S8-002(B) 7A いいえ L80*W16*T3 mm 該当なし
5S PCM-L05S60-F91 60A はい L120*W65*T11 mm 温度スイッチ付き
5S PCM-L05S75-J49 20-75A いいえ L130 *W116 *T8 mm NTC付き
5S AY-L5S100A-M069 30-100A いいえ L180 *W75 *T20 mm NTC付き
5S AY-L5S20A- M057 10-20A いいえ L80 *W60*T20 mm NTC付き
6S PCM-L06S10-554 10A はい L64*W36*T5 mm NTC付き
6S PCM-L06S10-J15 10A いいえ L109*W17*T5mm with SMBus,NTC
6S PCM-L06S12-520 12A はい L64*W50*T4.6 mm 該当なし
6S AY-LX6S15A-T016 15A いいえ L52*W34*T6 mm NTC付き
6S PCM-L06S07-849 7A はい 長さ51×幅26×厚さ4mm 該当なし
6S PCM-L06S20-H22 20A はい L103*W55.6*T6mm with SMBus,NTC
6S PCM-L06S20-H22 20A はい L103*W55.6*T6mm with SMBus,NTC
6S PCM-L06S50-L33 50A はい L105*W65*T8mm with I2C, NTC
6S PCM-LB07S20A-AY026V4 (LF-6S10A) 10A いいえ L65 * W40 * T7 mm NTC付き
6S PCM-LX06S07A-641 7A いいえ L103 * W17 * T5 mm 該当なし
6S PCM-L06S12-520 12A YES L64*W50*T4.6 mm With Temperature Switch
6S PCM-L06S10-554(6S) 8A YES L64*W36*T5 mm 温度スイッチ付き
6S PCM-L06S100-L34 30-100A いいえ L145*W105*T8mm NTC付き
6S PCM-L07S30-C29 10-30A いいえ L126*W65*T6mm 該当なし
7S PCM-L07S15-K39 15A はい L120*W63*T8mm with SMBus,NTC
7S PCM-L07S10-811 10A はい L60*W60*T17 mm 該当なし
7S PCM-L08S08-953 5A YES L100*W45*T6mm With 10K NTC
7S AY-LB7S10A-T004 10A はい L100*W65*T8 mm NTC付き
7S PCM-L07S08-747 8A はい L64*W41*T5 mm NTC付き
7S PCM-L07S12-476V3 12A いいえ L123*W34*T5 mm 該当なし
8S PCM-LB8S15A-AY026 15A はい L65*W40*T8 mm 温度スイッチ付き
8S PCM-L08S08-953 8A はい L100*W45*T6 mm NTC、I2C搭載
8S PCM-L08S08-331 8A はい L72.5*W65*T3 mm 温度スイッチ付き
8S AY-LB8S5A-T003 8A はい L60.3*W40*T7 mm 該当なし
8S PCM-L08S60-K38 60A はい L136*W80*T11mm with I2C&Bluetooth,Temperature Swtich,NTC
8S PCM-LB24S100A-AY233 80A いいえ L90*W65*T10 mm 温度スイッチ付き
8S PCM-LB8S15A-AY026(8S) 15A YES L65*W40*T8 mm 温度スイッチ付き
8S PCM-L08S25-A72 25A いいえ L119*W51*T6.5 mm 該当なし
8S PCM-L08S60-K38 20-60A いいえ L136 *W80 *T11 mm NTC付き
    お問い合わせ

    チャットでお問い合わせ

    • お問い合わせ内容