LED Fuel Gauge PCM-LED005-339 Smart Battery Managment with Fuel Guage - AYAA TECHNOLOGY CO., LTD

Smart Battery Managment with Fuel Guage PCM-LED005-339 Features： Specification： ·Apply for PCB of 1～12 cells Li-ion /Li-polymer battery pack. ·Power consumption:80uA ·No external power is need ·Dimension(LxWxH)：L51×W26×H4mm ·Can connect directly to pcb/pcm via special connector on ·Weight： 6.5g board or connect directly to output of battery pack • 5 LED display for battery pack’s voltage.The voltage listed below Warning： is base on battery during discharge.(The actual voltage might ＊ Please do not plug in wrong polarity vary for LED 2-4 during charging.) otherwise the module will be completely destroyed. 0%LED Flashing for singel cell voltage<3V(must recharge battery) ＊ The resistance potential ratio of energy display 1 LED = 20% for singel cell voltage: 3.0-3.3V（battery need recharging） module in different packs are different, 2 LED = 40% for singel cell voltage: 3.3-3.5V only use the voltage that the label nominated. 3 LED = 60% for singel cell voltage: 3.5-3.8V ＊ Please make sure your selection is correct before you buy. 4 LED = 80% for singel cell voltage: 3.8-4.1V 5 LED = 100% for singel cell voltage: 4.1-4.2V ( battery is full ) Resistance potential ration in different numbers - AYAA TECHNOLOGY CO., LTD