PCM-L05S06-338 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance PCM for 3S-4S - AYAA TECHNOLOGY CO., LTD

PCM for 3S-4S PCM-L05S06-338 (4S) Protection Circuit Module Specifications For 12.8V LiFePO4 Battery PackProtection Circuit Module Specifications For 14.8V Li-ion/Li-polymer Battery Pack Model:PCM-L05S06-338 (4S) No Test item Criterion 　 　 　 Lifepo4 Li-ion/Li-polymer 1 Voltage Charging voltage DC14.4V CC/CV (3.6V/cell) DC:16.8V CC/CV (4.2V/cell) Balance voltage for single cell 3.6V±0.025V 4.2V±0.025V 2 Current Balance current for single cell 36±5mA; 42±5mA; Current consumption for single cell ≤20μA ≤20μA Max. continuous charging current 7A 7A Max. cont. discharging current 7A 7A 3 Over charge protection (single cell) Over charge detection voltage 3.9V±0.025V (optional) 4.35±0.025V (optional) Over charge detection delay time 0.5-2.0S 0.5S—2.0S Over charge release voltage 3.80±0.05V 4.15±0.05V 4 Over discharge protection (single cell) Over discharge detection voltage 2.0±0.05V (optional) 2.4±0.08V (optional) Over discharge detection delay time 10-300mS 10-1000mS Over discharge release voltage 2.3±0.05V 3.0±0.1V 5 Over current protection Over current detection voltage depend on the above points depend on the above points Over current detection current final data fixed from actual test final data fixed from actual test Detection delay time 5-20ms 5-20ms Release condition Cut load, Auto release Cut load, Auto release 6 Short protection Detection condition Exterior short circuit Detection delay time 100～500us Release condition charge up 7 Resistance Protection ... - AYAA TECHNOLOGY CO., LTD